Pages

Wednesday, December 3, 2008

ABSORBENT COTTON- Feasibility Report

As I promised earlier, am trying to keep my words. Here is another simple and product in demand namely ABSORBENT COTTON. The volume of the project could be tailor made but with certain changes in the profit margins. Interested persons are advised to check the local market potential for a viable unit in that area. Any comments or queirys welcome.


ABSORBENT COTTON- Feasibilty Report
Product and Its uses:
Absorbent Cotton also known as “Surgical Cotton” or “Cotton Wool” is mainly used for medical purposes in hospitals, dispensaries, etc.

Though the use of absorbent cotton was started several decades ago, the growth of this industry took a boom with the recent development in medical facilities to corporate levels. Growing awareness of hygienic materials increased the demand for absorbent cotton. Absorbent cotton is also extensively used for making sanitary pads, napkins and filters.
Market Potential :
Demand for absorbent cotton increases with increase in population, number of hospitals, dispensaries, health centers, etc. Besides Indian market it has export potential too. Japan, USA and EU countries import absorbent cotton from india with specific standards.

Manufacturing Process :
Raw cotton is opened in CRIGHTON opener where it is loosened and dust and other particles removed. The cotton is then sent to a KIER where it is steamed for about 3 hours along with added chemicals like SODA ASH, CAUSTIC SODA, DETERGENY, etc. This treatment removes waxes and oils and softens foreign matters present in cotton.

Cotton is washed and bleached with chemicals like hydrogen peroxide or sodium hupochloride. This bleaching process not only whitens the cotton but also improves its absorbing quality and disintegrates left over foreign materials.

Its is then opened in a wet cotton opening machine and then dried in a dryer thus avoiding the dust mixing up again with cotton. After drying the cotton once again thoroughly opened up in lap room and made into laps. The laps are then fed into a carding machine and the cotton is prepared into thin layers.

These thin layers are rolled and packed and disbursed to the consumer.

Project estimation :
The estimates made for techno feasible plant set-up. Unit is viable with 100tons per annum set up with standard type of manufacturing activity.

Land & Buildings :
350 sq.m. area with a built up shed of 200sq.m.
Equipment :
Carding machine, Hydro extractor, Wet cotton opener, Cotton dryer, Kier, Vertical cotton opener, Lap machine,rolling and winding machine, Boiler, etc.a
Manpower requirements :
Mgr/Technologist, Blow room operator, Boiler operator, skilled labour 6, Unskilled labour 14, clerk.

Raw Materials :
Raw ginned cotton – 10 tons; soda ash-1ton; Caustic soda-1.5tons; Bleaching agent-200kgs; Packing materials.
Utilities :
Coal for Boiler 25 tons; Electricity 100KVA, water treatment chemicals.

Other expenses :
Office establishment; Transportation; Maintenance; Plant rent.

Capital Investment :
Estimated Capital Invetment- Approx. INR31,50,000/-
Cost of Production :
Estimated Cost of production Per anum-INR34,80,000/-
Turnover :
By sale of Absorbent Cotton-INR42,40,000/-
Profit :
Profit per annum-INR7,60,000/- & Profit Rate -21.8%
Rate of Returns :
Rate of returns-24.1%
Break Even Point :
B.E.P.-53%

For more details and help you shall contact lotulinks@gmail.com

173 comments:

Anonymous said...

Very good report. Keep it up.

ravibarora said...

Good report.

Can you give the market demand of the product.What is export potential of the product. Which are international standards followed in this type of product.

Unknown said...

Mr.Ravi,
Market demand has to be assessed on case to case basis. If you give your location and details, I shall find out the useful info for you. Local market to be studied.

Main export market is to japan, Korea, Australia, Newzealand and Europe from india.

There are three standards for indian manufacutrers IP, BP & USP. To export to Europe BP is mandatory. Where as to east asia and australia its USP. Depending on the customer the standards to be maintained.
- NS Murthy

Unknown said...

dear sir, let me know the manufacturer of all these machines
thank you...p.b.shah.

Anonymous said...

Mr.Pravin
your mail is required to send you the details.
good luck

Unknown said...

i have seen your report on absorbent cotton
sir i want to know about how to start the manufacturing unit

which licenses we have to take and what r the government organisation where we can register ourself

and what is the total sales in india and how much Rs export is there

and also some consulting firm in mumbai

my email id is vrushankved@gmail.com

Anonymous said...

Dear Sir,

Is it a viable project in a city like INDORE M.P.. Kindly send me the details of machine manufacturers. Is it the right time to enter into this line.

THANX.
SANJAY AGRAWAL

Unknown said...

Dear Sir,

Really appriciative project and hardwork is seen on this report.

We would like to get a similer project report on FRP and GRP Pipe and other products made our of FRP and GRP. Please let me know about the same. My email ID is excentureint@gmail.com

Thanks and regards.
AMIN

Chirag Patel said...

Dear Sir,

I wantto purchase machines for Making Pleat Cotton-Zig-Zag Absorbent Cotton, & Surgical Dressings Made from Absorbent Cotton, Also Show me the Market Potential.
ceakey@yahoo.com

Chirag Patel

Chirag Patel said...

Can any one show me the exact technological report to make Bleached Cotton?

ceakey@yahoo.com

Chirag Patel

Unknown said...

Dear Sir,
Firstly thankyou for giving such good project report on ABSORBENT COTTON.
I'm realy surching for such report. I go through u'r report and it is very helpful.

I would like to start such business either of places
1) Maheshwar - (M.P.) 75KM. from Indore city.
OR
2)Sinner- (Maharashtra) 35KM. from Nashik.

pls guide me for this business in details for .

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as wel out of India.
and
3)Licences and Registration required for this production as wel for exports.

my e-mail id is gujarathirohit11@gmail.com


Thanking you in anticipation

Rohit Gujarathi.

(gujarathirohit11@gmail.com)

manish biyani said...

have seen your report on absorbent cotton
sir,i want to know about how to start the manufacturing unit

which licenses we have to take and what r the government organisation where we can register ourself

and what is the total sales in india and how much export is there

and also some consulting firm in mumbai

my email id is mmbiyani4524@rediffmail.com

Lakshman G said...

Hello Sir, I was looking for "Surgical Cotton Report" on net since more than 1 and half hour. I am glad to see that you have provided very good report. I am planning to start this unit but before starting I need more info... Please send me the required details so that it will be useful me to move forward .. I look forward for your help... Thanks in Advance. My Name is Lakshman and my email id is glakshman@hotmail.com

Unknown said...

dear sir
Really impressive report.
am looking to start a surgical cotton plant in karnataka i need more information...please provide me the details regarding this...

kunal said...

Dear Sir,
i am planning to start this cotton unit want to knw that will it be feasible to start in jharkhand state
kunal.

Anonymous said...

Dear sir,I go through u'r report and it is very helpful.pl. give me an idea of...1)Machinary Reqired and Its manufacturers.
2)Market demands in mahrashtra as wel in India.
and
3)Licences and Registration required for this production as wel for exports.4)finance and subcidies if any.5)any other co by-product.6)market survey questionaire.my mail id is rajale.mukund@rediffmail.com

sunil said...

Dear sir i want to start abs cotton mfg unit pl tell me the total capital investment about it.
also tell me about bank loan,finance etc.
my email is medicity_nirlife@hotmail.com

Rakesh said...

Do you need a drug liscence for this?

Unknown said...

dear sir,
i have seen your report on absorbent cotton
sir i want to know about how to start the manufacturing unit

which licenses we have to take and what r the government organisation where we can register ourself

and what is the total sales in india and how much Rs export is there .My email id is srinemichand_jewellers@yahoo.in

Unknown said...

Respected sir,

Dear Sir,
First i would like to thank you for giving such good project report on ABSORBENT COTTON.
I was really searching for such report. I went through your report and it is very helpful.

I would like to start such business in Hyderabad ,Andhra pradesh.

please guide me for this business in details regarding

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as well out of India.
and
3)Licences and Registration required for this production as wel for exports.

my e-mail id is srinemichand_jewellers@yahoo.in


Thanking you in anticipation

Unknown said...

Prashant Pawar,
Dear Sir,
Project report is really good.
I want information regarding
How to start manufacturing unit? How much investment initialy required? what are the raw material & equipments? Which are the liscences are required?

my emial id is prashantpawar85@gmail.com

mehul said...
This comment has been removed by the author.
mehul said...

can you give the detailed manufacturing process & list of machinery suppliers & market potential in gujarat

abhishek said...

We can offer speciality chemicals for bleaching absorbent cotton confirming to international standards. Our products are eco-friendly, non toxic and biodegradable in nature. You can email your inquiries at coatsyn@gmail.com or visit our website www.coatsyn.com for further details.

Unknown said...

Very Good Project.
It will be Fulfilled when you will provide the full details like Cotton fiber range,market guidance,Cost calculation,Financial terms in Excel Sheet.
Please Provide the details to my mail id sachin.ikf@gmail.com
Thanks & Regards
Sachin Pallolam.

Unknown said...
This comment has been removed by the author.
Unknown said...

Dear Sir,
Firstly thankyou for giving such good project report on ABSORBENT COTTON.
I'm realy surching for such report. I go through u'r report and it is very helpful.

I would like to start such business
pls guide me for this business in details for .

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as wel out of India.
and
3)Licences and Registration required for this production as wel for exports.


my email id is
niraj.ohara@rediffmail.com

Unknown said...

sir iam silas from dist: warangal from Andhrapradesh i am interested to start absorbent cotton industry our area has a good potential for cotton production .sir would please send details of how to get permission from governament,how to start the production based on what factors we have to estimate it. kindly send the details my email id is silaspanga@gmail.com,silas_25@yahoomail.co.in
Thanking you

Unknown said...

Sir,
As this project is based on cotton and in vidarbha, cotton is a major crop for us.
I am also an entrapreunear from wardha want to set up this project for export quality product. Can I have detaile information about export of the same and machinery required.

SHRIPAD
9371168776
chemshri24@gmail.com

Anonymous said...

sir,
i was searching for such kind of buissness.
sir can u guide me to startt this unit.
sir, can i get ur contact details?
piyush agrawal, jalna
(piyush_ragrawal2yahoo.com)

Unknown said...

dear sir,
i have seen your report on absorbent cotton,it is Really appriciative project and hardwork is seen on this report.
sir i want to know about how to start the manufacturing unit

which licenses we have to take and what r the government organisation where we can register ourself

and what is the total sales in india and how much Rs export is there

and also some consulting firm in pune or mumbai or aurangabad.
I would like to start such business in pune and aurangabad.and sir please tell me about bank loan,finance etc.
sir, I m waiting for your response.....my mail id is a.sachin96@gmail.com
thanks and regards,
sachin amte.

Unknown said...

dear sir,
i have seen your report on absorbent cotton,it is Really appriciative project and hardwork is seen on this report.
sir i want to know about how to start the manufacturing unit

which licenses we have to take and what r the government organisation where we can register ourselfand what is the total sales in india and how much Rs export is there

and also some consulting firm in pune or mumbai or aurangabad.
I would like to start such business in pune and aurangabad.and sir please tell me about bank loan,finance etc.
sir, I m waiting for your response.....my mail id is a.sachin96@gmail.com
thanks and regards,
sachin amte.

nayan said...

Dear Sir,
i have gon through many of information about surgical cotton but you provided exact information, coast estimation and other important parameters. Sir i am looking to start the same business in city Nagpur. if you have further detailed information about this project kindly mailed me the information or related article.
email- navindhoble2009@gmail.com

Unknown said...

very good report, sir. I am looking forward to start the same business.please guide me about tecnical consultancy in Maharashtra and machine suppliers.

rahul d said...

dear sir, it is a vry nice report. i want to start such unit in Aurangabad, Maharashtra. i would like to know, if the best available technology is used for manufacturing. raw material used is raw cotton from field or ginned cotton. can you provide me consultancy services on turn key basis. pls do reply me. my email id is rahul.d0009@gmail.com.

Anonymous said...

dear sir
i have through your project report on absorbent cotton.sir i want to set up such unit in my native place beed district in maharashtra,there is ample availabilty of cotton cause of 70 ginning mills in district. as the district is under rural category,whether it would be possible to find the market demand for produce.
please guide and suggest.

thank you.
mangesh bhandari

Unknown said...

dear sir,

It is a very good report. I am interested to start surgical gauze cloth plant at visakhapatnam. can you please give me the project report and machinery suppliers details to mail id
bnmurthy_9@yahoo.co.in

thanks and regards

murthy.

ash19 said...

i am looking ahead to start Surgical cotton project in Andhra Prades, Can your please send the project report in detail to following email id

bosevarma@yahoo.com

Unknown said...

dear sir,
it is a very good report and i would like to start the same project of absorbant cotton in nanded maharashtra ,kindly guide me about the machinery and the procedure ,my email id is rajwinbhatia@yahoo.com .
thank you
rajvinder singh

mohit moonat said...

sir can i get your contact no. if possible plz let me know at +918989181818,

Unknown said...

such a nice project.& i want to work on the same project .so pl suggest us for the same regarding machinery & raw material avablity .


Regard's
Heetesh Agrawal
bargarh.Orissa

Unknown said...

such a nice project.& i want to work on the same project .so pl suggest us for the same regarding machinery & raw material avablity .


Regard's
Heetesh Agrawal
bargarh.Orissa

akshay sharma said...

Respected sir,

Dear Sir,
First i would like to thank you for giving such good project report on ABSORBENT COTTON.
I was really searching for such report. I went through your report and it is very helpful.

I would like to start such business in Hyderabad ,Andhra pradesh.

please guide me for this business in details regarding

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as well out of India.
and
3)Licences and Registration required for this production as wel for exports.
4) how much pollution is caused in the manufacturing.

my e-mail id is ak25044_2000@yahoo.com


Thanking you in anticipation.

IMRAN POPTE said...

dear sir
Really impressive report.
am looking to start a surgical cotton plant in maharastra washim i need more information...please provide me the details regarding this...

IMRAN POPTE said...

Respected sir,

Dear Sir,
First i would like to thank you for giving such good project report on ABSORBENT COTTON.
I was really searching for such report. I went through your report and it is very helpful.

I would like to start such business in Hyderabad ,Andhra pradesh.

please guide me for this business in details regarding

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as well out of India.
and
3)Licences and Registration required for this production as wel for exports.
4) how much pollution is caused in the manufacturing.
mail me @ impops24@gmail.com
mob 09923773007

Anonymous said...

Hello sir,
I have done some market research on absorbent cotton and i am preparing proposal to start the unit i am going to meet some machinery unit but i want unit with less capacity of production than u have mentioned in your report. would you please provide me details and addresses thats how i can proceed further. kindly give me details on my mail id as ikkardamodar@gmail.com
Regards.
Dr. Damodar Ikkar

Anonymous said...

Hello sir,
Forgot to ask couple of question that give me details of licensing and GMP and quality standards required for export quality product. waiting for your answer, kindly mail me at ikkardamodar@gmail.com


Regards.
Dr. Damodar Ikkar

Anonymous said...

Hello sir,
Forgot to ask couple of question that give me details of licensing and GMP and quality standards required for export quality product. waiting for your answer, kindly mail me at ikkardamodar@gmail.com


Regards.
Dr. Damodar Ikkar

Anonymous said...

Dear sir,
I want to complete informaton on surgical cotton plant so please give your cotact details.
Iwant to set up this plant in maharastra.


I want complete surgical cotton plant.so please send me project report and quotation.

1) 2000 to 2400 kg production per day.(800kg per shift).

2) Number of carding machine is 5.

Email I.D:rravi_gothwal@rediffmail.com

Thanks and regards

Ravi Gothwal.(India).



































































Dear sir,

I want complete surgical cotton plant.so please send me project report and quotation.

1) 2000 to 2400 kg production per day.(800kg per shift).

2) Number of carding machine is 5.

Email I.D:rravi_gothwal@rediffmail.com

Thanks and regards

Ravi Gothwal.(India).





















































































Dear sir,

I want complete surgical cotton plant.so please send me project report and quotation.

1) 2000 to 2400 kg production per day.(800kg per shift).

2) Number of carding machine is 5.

Email I.D:rravi_gothwal@rediffmail.com

Thanks and regards

Ravi Gothwal.(India).

Adv.Mahesh R.Bhokarikar said...

Sir,
I have been appointed as the panel advocate for the registration and other ancillary of the industry of the manufacturing of surgical cotton.I am very satisfied to see your study over the subject.I will be happy if you stay in contact.my email id advmahesh_r@yahoo.co.in
Regards.
Adv.Mahesh R.Bhokariakar.

bharat sonani said...

Sir,this is very nice report, i m very much impressed,sir i m planing to start this plant,but i want more information about the machines,,how they work,,, so sir please give me information about this..
my email ID is sampark2bharat@gmail.com..

bharat sonani said...

thanks sir,, this is very nice report..sir, i m planning to start surgical cotton plnt.. i want some more information about machines,, and how they work, and i want some contect about the industry in which this plant is running... so sir it is my humbel requist to give me information. my email ID is sampark2bharat@gmail.com.

bharat sonani said...

sir, this is very nice report, i want some more information about tha machine and how they work, and who are the suppliers. please give me informatiion on my email id. sampark2bharat@gmail.com

bharat sonani said...

sir, this is very nice report, i want some more information about tha machine and how they work, and who are the suppliers. please give me informatiion on my email id. sampark2bharat@gmail.com

vikas kudari said...

sir,
thanks for the report..
I would like to know whether is it
requires a particular type of climate conditions like hot , less humidity places....?
please more details on this..
send to my mail id
vikaskudari@rediffmail.com

paras said...

Anonymous said...
Dear sir,
I want to complete informaton on surgical cotton plant so please give your cotact details.
Iwant to set up this plant in maharastra.


I want complete surgical cotton plant.so please send me project report and quotation.

1) 2000 to 2400 kg production per day.(800kg per shift).

2) Number of carding machine is 5.

Email I.D:paras6464@gmail.com

Thanks and regards

vikram Paramane said...

very good report
I want all information this absorbent cotton plant my mail ID
so please send your mail address and cell no. my maile ID is paramanev@rediffmail.com

JS said...

Sir,

May i have the complete details of the project, which will help me to start the business with your kind blessings.

Kindly email me on jigen11@gmail.com

Thanks & Regards

Jigen Shah

vikram said...

sir,
i was searching for such kind of buissness.
sir can u guide me to startt this unit.
sir, can i get ur contact details?
Vikram Paramane
9881588083
Email-paramanev@rediffmail.com

vaibhav said...

Dear Sir,
thanks for very good report about cotton industries. sir we are leading manufacturer of surgical cotton in jaipur named (K.C.Industries) Bindiyaka. Sir plz send me some information about cotton roll wraping machine , continuous dryer machine manufacturers plz send me details on my email id vaibhav.bkgupta001@gmail.com

sanjay c k said...

thank u verymuch....
i need to know more ab this project like where i can visit for a study. i come from belgaum, karnataka shall i get a factory add near t my area wer i can visit... plz help me.

Mukesh Gupta said...

We are dealers of used textile machines. If you have any requirement, pls let us know. our email is mcgjpr@gmail.com

Sada Nimse said...

Sir, thanks for such a goood PR. It gave me a proper guideline to start a surgical cotton buisness. sir please forward me the details right from the liscening authority, establishment of the small scale plant in nasik technical report, necessary NOC's from the respective authorities in Nasik. Details about the initial investments and marketting & provide me the consultancy. Thanks

with regards,
Sada.D.Nimse
Nasik.
Email: shiv_nimse27@rediffmail.com, shiv.nimse27@yahoo.com

sumant said...

Hats off to your efforts sir.I was really searching for such report. I went through your report and it is literally great.

I would like to start such business in Aurangabad, Maharashtra. could u tell me whether cotton grown in maharashtra be moulded for surgical use.

please guide me for this business in details regarding

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as well out of India.
and
3)Licences and Registration required for this production as wel for exports.
4) what are the opportunities for raising the capital, any govt. subsidies, time required for realising profits approx.
Please furnish me with this important information at your earliest on my mail id-- sumant201@gmail.com...thank u sir

Dr.Shyam Patil said...

hello sir,
thank you for this wonderful explaination ,but sir i would like to know more about the issues like
-licencing part
-loan part
-market demand in maharashtra

thanking you in anticipation,

Dr. Shyam L. Patil
drshyamlpatil@gmail.com
mob.91-956-172-9586

anant said...

really valuable project report,

1)i want same project report for 2400kg per day production plant.

2) how many & what type of machinery required. contact details of machinery provide o any consultancy.

3) i want to start this business in jalna nearby aurangabad city. (Maharashtra)
please give market analysis for the same as well as for out of India.

my mail id:- rautanant25@gmail.com

godge g r said...

Hello Sir,
i have seen your project report while searching information for Surgical co=
tton manufacturing. Sir myself Godge Ganesh from ahmednagar,maharashtra.I h=
ave pursued M.Pharm (Pharm tech).=20
Sir i have now prepared my self to start a MSME unit and i think this w'd b=
e good option for me as we have great availability of raw material required=
for this plant i.e. cotton.=20
But i dont have any business background in my family. Please tell me from w=
here i will get training for manfacturing process of cotton.
At the moment i have plot of 5000 sq ft nearby MIDC area of ahmednagar.Also=
i have prepared my project for the same=A0seeking subsidy from goverment i=
f any. Can i start it by making it any co-oprative unit so as to get subsid=
y from government.
=A0Do u have any information @ market potentail for the ahmednagar and near=
by area or maharashtra?
Please give me any possible help regarding that u can...!!
Thanks for sparing your valuable time for me.
Thanking you,
Godge Ganesh
09028757508
grgodge@yahoo.com
Ahmednagar,Maharashtra.

Mayank said...

dear sir,
i have seen your report is really good.i need to know about the license(medicated) process and what kind of NOCs or licenses i need.
my email add. is singhmayankpr@gmail.com
thanking you very much

SV said...

Dear Sir,
Thank you for providing good highlight on ABSORBENT COTTON.
I am planning to start plant in Maharashtra. I went through your report and it is very helpful.

I would like to start such business in Maharashtra

please guide me for this business in details regarding

1)Machinary Reqired and Its manufacturers along with tent. costs

2)Market demands in India as well out of India.


3)Licences and Registration required for this production as wel for exports.

4) how much pollution is caused in the manufacturing.

My Mail ID is avaidya.09@gmail.com

Nikhil said...

Hi Sir,

I would like to know about the licenses required to setup the abpve mentioned unit and also all the necessary indispensable procedures.

Kindly, contact me : nikhil.a.agrawal@gmail.com

Thanking you for you generous provision of the above details.

Anonymous said...

Hello,

Really a great and detailed help for anyone who want to start Surgical Cotton Manufacturer. I am also interested to start a unit in Maharashtra so could you please help me out for following points.

1. Licencing required.
2. Machinery providers.
3. Export options with licences. International standards suppose to follow.
4. Future scope etc..

Please reply as per your convenience on rlakhotiya@gmail.com

Thanks,
Ravi Lakhotiya

nagaraju said...

Dear Sir,
First i would like to thank you for giving such good project report on ABSORBENT COTTON.
I was really searching for such report. I went through your report and it is very helpful.

I would like to start such business in Guntur ,Andhra pradesh.

please guide me for this business in details regarding

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as well out of India.
and
3)Licences and Registration required for this production as wel for exports.

my email id is
nagarajchandala@gmail.com


Thanking you in anticipation

nagaraju said...

Dear Sir,
First i would like to thank you for giving such good project report on ABSORBENT COTTON.
I was really searching for such report. I went through your report and it is very helpful.

I would like to start such business in Guntur ,Andhra pradesh.

please guide me for this business in details regarding

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as well out of India.
and
3)Licences and Registration required for this production as wel for exports.

my e-mail id is
nagarajchandala@gmail.com


Thanking you in anticipation

Tejsa Patel said...

hello sir

i have read a feasibility report in ur blog

i want to know about this plant

i want to set-up this unit in amreli city which was situated 120 km away from rajkot , gujarat

please send me market detail and all other detail .and from where i'll get this machinary and etc.

hope u'll help me

thanks in advance

please send me all detail in my email address tejasgol@gmail.com

ganesh pharma said...

plz send me information
ganes_yadav@yahoo.com
09827070089
08889077789

DHAVAL KAKKAD said...

Thank you for the report sir.

my name is dhaval and my email id is
dhaval.kakkad079@gmail.com

Please send me the details regarding the export of the product and the local demand as well.

and what kind of licenses i need to sell my product out of india as well as in the domestic market.

please send me the details of that.

Anonymous said...

Dear Sir,
Thanks for ur valuable information regarding surgical cotton - product.Can I get Some information regarding the Supply & demand status in chennai.I like to start a small unit - pls provide me information regarding Machines Suppliers,License & registration procedures & marketing scope.

Regards,
Balaji Mani
balajimani_mba@sify.com

ranjtih said...

hi your project report is excellent and simple to understand...sir i just want to know which cotton is used to manufacture surgical cotton..

saurav said...

Dear sir,I am saurav Jain from Assam (Guwahati), I go through u'r report and it is very helpful, please give me an idea of:-
1)Machinary Reqired and Its manufacturers.
2)Market demand in Assam as wel in whole north-east.
3)Licences and Registration required for this production as wel for exports.
4)finance and subcidies if any.
5)any other co by-product.
6)market survey questionaire.
my email id is sauravjain20@gmail.com

saurav said...

Dear sir,I am saurav Jain from Assam (Guwahati), I go through u'r report and it is very helpful, please give me an idea of:-
1)Machinary Reqired and Its manufacturers.
2)Market demand in Assam as wel in whole north-east.
3)Licences and Registration required for this production as wel for exports.
4)finance and subcidies if any.
5)any other co by-product.
6)market survey questionaire.
my email id is sauravjain20@gmail.com

Anonymous said...

Dear Sir

I am basically business consultant from Hyderabad

One of my client in AP is planning to set up factory in coastal andhra.

we need the report

Please let us know the cost & other details

BRRaju
99088 99980

Neil... said...

i have seen your report on absorbent cotton
sir i want to know everything about how to start the manufacturing unit, its investment, land requre etc.

which licenses we have to take and what r the government organization where we can register our self

and also some consulting firm in Pune

my email id is nbkunjir@gmail.com

Anonymous said...

good report,
Can you give me a market demand in gujarat? can be a profitable project at this time?

rushirajesh@gmail.com

RAJESH PATEL
Ahmedabad

Kuldeep said...

Hats off to your efforts sir.I was really searching for such report. I went through your report and it is literally great.

I would like to start such business in Jabalpur, Madhya Pradesh. could u tell me whether cotton grown in Madhya Pradesh be moulded for surgical use.

please guide me for this business in details regarding

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as well out of India.
and
3)Licences and Registration required for this production as wel for exports.
4) what are the opportunities for raising the capital, any govt. subsidies, time required for realising profits approx.
Please furnish me with this important information at your earliest on my mail id-- dewanikuldeep@gmail.com...thank u sir

Mali said...

Dear sir

This is great. I was looking forward to start this absorbent cotton wool manufacturing.

And sir still couldn't find the machine manufactures for this Cotton wool manufacturing process.

So If you can help me with that, It will be great.

maliya_2@yahoo.com this is my E-mail address. I'll be waiting for your mail. Wish you'll in-box me as soon as possible.
Thanks.

Anonymous said...

really valuable project report,

1)i want same project report for 2400kg per day production plant.

2) how many & what type of machinery required. contact details of machinery provide o any consultancy.

3) i want to start this business in Haridwar nearby. (uttrakhand)
please give market analysis for the same as well as for out of India.

my email id :-- lotuslifecare@gmail.com
ARVIND LOCHAN GOEL
09412607992

EcO said...

hello sir,
plz give me more details of Absorbent Cotton Wool Roll Making Machinery and project report.beacause i want to start a business of this item.plz send me total informatation about Absorbent Cotton Wool. email:-parth_delvadiya@hotmail.com

EcO said...

hello sir, plz give me more details of Absorbent Cotton Wool Roll Making Machinery and project report.beacause i want to start a business of this item.plz send me total informatation about Absorbent Cotton Wool. email:-parth_delvadiya@hotmail.com

EcO said...

hello sir, plz give me more details of Absorbent Cotton Wool Roll Making Machinery and project report.beacause i want to start a business of this item.plz send me total informatation about Absorbent Cotton Wool. email:-parth_delvadiya@hotmail.com

EcO said...

hello sir, plz give me more details of Absorbent Cotton Wool Roll Making Machinery and project report.beacause i want to start a business of this item.plz send me total informatation about Absorbent Cotton Wool. email:-parth_delvadiya@hotmail.com

EcO said...

hello sir, plz give me more details of Absorbent Cotton Wool Roll Making Machinery and project report.beacause i want to start a business of this item.plz send me total informatation about Absorbent Cotton Wool. email:-parth_delvadiya@hotmail.com

Anonymous said...

Dear sir,
Thanks for project report,it is very useful for us.
plz give me some other information
1. license and registration proses for this production.
2. machinery promo,costs and providers in india
and other useful information
my ID-
chugh.gsn2010@yahoo.com
thanks

akot said...

Dear Sir,
Firstly thankyou for giving such good project report on ABSORBENT COTTON.
I'm realy surching for such report. I go through u'r report and it is very helpful.

I would like to start such business either of places
1) ahmedabad gujarat

pls guide me for this business in details for .

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as wel out of India.
and
3)Licences and Registration required for this production as wel for exports.

my e-mail id is ashishrx@gmail.com

mehul said...

Hello sir ,
It feels good to read your report sir , but have few questions regarding the projects .... can v communicate through any medium ...
my mail id :- mehultank86@gmail.com
mobile no:- 09425138956

taha said...

sir
i want to start a cotton plant in kashmir i have already sent u a mail
kindly check ur inbox


my email: syedtahamohd@gmail.com

taha said...

sir,

I want to start the surgical cotton plant in kashmir. i want assistance in the plant and machinary my id syedtahamohd@gmail.com

taha said...

Sir.

Saw your post on on feasibility reports.I am intending to start a surgical cotton plant in Kashmir.I have already got the land leased in industrial growth center.Am processing for power and pollution control board.I need your assistance in forecasting the demand in kashmir and the availability of raw cotton. and also the plant and machinery considering decent production.Kindly reply and if there are any consulting charges please do tell me.

Anonymous said...

Dear Sir,

How can I start this production with on small scale, I want to fabricate these process machine myselt & start production, because I can fabricate such process machine because basically I am a Mechanical Engineer& I am having cotton farming background,

So, pls suggest the positive way so that I can start these production at my village at very less expense.

email ID : manoj_thakare19802006@rediffmail.com

mickey said...

First i would like to appreciate such kind of tremendous work... I have been seeking for this project..

I am really interested on this project sir, kindly assist me on the below:

1. Cost of each machinery and their supplier details

2. what type of Licensing/ registration/certification require to set-up the manufacturing unit

3.Please provide me the market study/ demand of Madhya pradesh, Indore and their conjoining areas

3. please advice me the supply chain of surgical cotton

please contact me directly on mickey4u1988@gmail.com

looking forward for your prompt early response

Regards,
Mickey Mittal
Skype id: mickey.mittal

Regards,
Mickey Mittal
Email-

Anonymous said...

From years we are in the business of suppling surgical cotton plants.We assist existing as well as new
entrepreneur in effecting easy and fast manufacturing of Exportable
standard of Surgical Cotton Wool.No doubt,our service is indeed
unique in terms of organization,net work,professional management
services and cost effectiveness.Hence,would like you to take the
advantage of unique services we offer.

Needless to mention that our organization is manned by highly experienced and qualified personnel who will ensure quick and efficient services . For any assistance please feel free to contact us. ashit999@yahoo.com

abhijit said...

Hello Sir,
thanks for such good project you posted.

i have place in pune and want to start absorbent cotton wool plant as i have done my study in export, i will be manufacturer exporter.

kindly please help me further with estimated cost of better new technological plant set up as a beginner with basic turnover.

Awaiting for your quick response.

Regards,
Abhijit R.Agarwal
email id.: lionheart.ag@gmail.com

Raj said...

Dear Sir,
Firstly thankyou for giving such good project report on ABSORBENT COTTON.
I'm realy surching for such report. I go through u'r report and it is very helpful.

I would like to start such business either of places
1) Buldhana - (M.H.) 100 KM. from Aurangabad city.
OR
2)Malkapur - (Maharashtra) 75 KM . from jalgaon .

pls guide me for this business in details for .

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as wel out of India.
and
3)Licences and Registration required for this production as wel for exports.

my e-mail id is rajput.ir@gmail.com


Thanking you in anticipation

Raj Rajput.

(rajput.ir@gmail.com)

KRISHNA BAOKAR said...

Dear Sir,
Firstly thank you for giving such good project report on ABSORBENT COTTON.
I'm really searching for such report. I go through your report and it is very helpful.

I would like to start such business either of places
1) Bhoom - (M.H.) 100 KM. from Aurangabad city.
pls guide me for this business in details for .

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as wel out of India.
and
3)Licences and Registration required for this production as wel for exports.

my e-mail id is krishnabaokar@gmail.com

Thanking you in anticipation

KRISHNA BAOKAR.

(krishnabaokar@gmail.com)

KRISHNA BAOKAR said...

Dear Sir,
Firstly thank you for giving such good project report on ABSORBENT COTTON.
I'm really searching for such report. I go through your report and it is very helpful.

I would like to start such business either of places
1) Bhoom - (M.H.) 100 KM. from Aurangabad city.
2) washi 125 km from solapur
pls guide me for this business in details for .

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as wel out of India.
and
3)Licences and Registration required for this production as wel for exports.

my e-mail id is krishnabaokar@gmail.com

Thanking you in anticipation

KRISHNA BAOKAR.

(krishnabaokar@gmail.com)

sanjay.j001 said...

Hello Sir,

The project report is really helpful and i have received the same from NIIR consultants. Can you mail me the details of manufacturing machinery suppliers list, raw material availability and demand in Eastern Maharashtra.
below is my : sanjay.j001@gmail.com

Unknown said...

Dear sir,
thank you for sharing this report as its conatins lots of things but i need some your help regarding mfg unit ofr surgical cotton
pls guide me for this business in details for .

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as wel out of India.
and
3)Licences and Registration required for this production as wel for exports.

4) from were i will get raw material

5)also provide the full details like Cotton fiber range,market guidance,Cost calculation,Financial terms in Excel Sheet

thank you,

regards
Ashwin
my email Id ashwindhoot29@gmail.com

Unknown said...

Dear Mr.Ashwin,
Thanks for your interest. I would be sending you details to your emial in a week's time.
goodluck

viva said...

ymplaynDesr Sir ,

Could you please provide details in my id

agrawalvivekbj@gmail.com

would be grateful to u.

Mukesh Gupta said...

We are having a complete used surgical plant for sale . Pls contact us at mcgjpr@gmail.com

Anonymous said...

Hi,

First of all I would like to thank you for the report. It was indeed very helpful. We are considering setting up a plant to manufacture the same in Guwahati, Assam.

Will it be possible to share the details of the manufacturers, and any other information that might be relevant to me.

You can email me at rahul.shillong@gmail.com

Thanks and regards,
Rahul

abhishek said...

We provide speciality chemicals for absorbent cotton bleaching confirming to IP & International standards with eco-friendly,biodegradable chemicals.
Contact us on coatsyn@gmail.com for further details.
Regards
Abhishek Mittal
Coatings & Synthetics

Unknown said...

how to search market for absorbant cotton? and we have to sale cotton through a distributor or supplier





my email is dhavalpatel88@gail.com


dhaval patel

Unknown said...

Dear sir,

Thank you very much for such a detailed report on manufacturing of surgical cotton.

I belongs from a farmers family and We are producing 500 - 600 quintal of cotton every year. I am researching from past six months for a productive business related to cotton. This report has given me a clear idea about the project. For execution of this project I will need your guidance on every aspect.

Please guide me to start this manufacturing unit and provide me the below mentioned details .

1. Cost of each machinery and their supplier details

2. what type of License / registration/certificate required to set-up the manufacturing unit

3. please advice me the supply chain of surgical cotton


It will be very kind of you if you mail me the above details on girishgdeshmukh@gmail.com

I would like to discuss further details with you regarding this project.

Looking forward to hear from you

Thanks & Regards
Girish Deshmukh
(girishgdeshmukh@gmail.com)

Shreegopal said...

Very good report....
Sir I would like to request you to please provide me with complete details like minimum set up cost with production capacity, industrial licenses, legal formalities for plant set up, industrial standards, machinery required, Return on Investments and all other details.Growth prospects and that too in a rural area like Shegaon (Dist. Buldhana, State-Maharashtra) were i want to set up this plant
Waiting for your reply...


Thanks and Regards
Shreegopal V Dangra
shreegopal.dangra@gmail.com

JC said...

fSir,
I have gone through the business feasibility report on Absorbent Cotton.It is very good and useful.Thank you very much for giving us such a good information.
I would like to know few additional information on this..
1)Please let me know the contact details of plant machinery suppliers.
2) Also suggest us to start the unit at low investment i.e around 10 lacs

3) Please provide market information of Guntur & Vijayawda districts of Andhrapradesh where I am planing to start the unit.

My mail id is : jayachandra_3@yahoo.com

Thanks & Regards,
Jaya Chandra.K

Unknown said...

e surgical disposables products offered surgical cotton by are pure

Unknown said...

Thanks for providing this information. I am planning to set up a Surgical cotton plant.
I appreciate if you can contact me ASAP.
Email : samarjeetinc@gmail.com
Cell : 09907544007

look forward to hear from you.

Anonymous said...

I am planning to set up a Surgical cotton plant.
if you could provide me more info it would be helpful
Email : a.pcthakur@gmail.com
Cell : 08408004648

look forward to hear from you.

Nirav said...

Thanks for wonderful information..
I am exploring such business opportunities and Manufacturing of Surgical Cotton is one of the. I need some more details/discussion/clarification in this regards as per your convenience. It is very helpful if you can provide your email id so I can mail you the same.
My Email Id: ptl.nirav@gmail.com
Mo No: +91 99798 58119

Unknown said...

Hello ,
I'm Ankur from Chandigarh. I would like to start surgical cotton business in Chandigarh (U.T.) or Mohali (Punjab). I need your guidelines and consultation regarding this project. Please guide me for this business in details regarding :

1) Machinery Required and Its Manufacturers ?
2) Market demands in India as well out of India ?
3) Licenses and Registration ?
4) How much investment initially required ?
5) Project Report and Quotation ?
6) Is this business profitable and scope ?

Please provide me information on above and more. Please tell me from where can i get training for manufacturing process of cotton.

Thanking You.

Regards,
Ankur Narang
9815004410

Anonymous said...

I want to start a surgical cotton plant in kolkata, Burdman,
Kindly contact me for the project report.

Rahul
# 9331293133

priyanshvora said...

dear sir,

wanted to know details abt wht are the lic,quality certificates, and documents required for abs cotton factory.
pls mail me the details at bharti.co@gmail.com / 9820444396

Jay Patel said...

First of all thank you for providing such valuable information.
Can you provide some more relevant information?
1)Machinary Reqired and Its manufacturers.
2)Market demands in India as well as out of India.
and
3)Licences and Registration required for the production as well for export.

my e-mail id is jay_patel2006@yahoo.co.in

Thank you

Naresh said...

I have full experience of running and installing the Absorbent cotton plant and looking for some financial partner to start the project. Any body interested, call me: 09312255389 email: naresh.kh@gmail.com
Naresh
Delhi.

Anonymous said...

Hello Sir,

My self Manoj D. Patil, We have Started Akansha Surgical Enterprizes, Avdhan MIDC,Dhule, Maharashtra, in that we are preparing absorbent cotton IP..

So we need your help for getting distributor for our absorbent cotton IP product.

Hope you will help us


looking positive responce from your side.


Thanking you,

Regards,
Manoj D. PAti,08380048830

Manoj Patil said...

Hello Sir,

My self Manoj D. Patil, We have Started Akansha Surgical Enterprizes, Avdhan MIDC,Dhule, Maharashtra, in that we are preparing absorbent cotton IP..

So we need your help for getting distributor for our absorbent cotton IP product.

Hope you will help us


looking positive responce from your side.


Thanking you,

Regards,
Manoj D. Patil, mbl no. 08380048830
email id:- manoj16885@yahoo.co.in

Anonymous said...

Are you in search of a legitimate loan? Tired of Seeking Loans and Mortgages?
Have you been turned down by your banks ? Do you need a loan to clear
your debts/bills? Then your financial trauma is over. We Offer Loans from
$5,000.00 to $100,000,000.00 with 3% interest rate. We are certified
and trust worthy. we can help you with financial assistance. If interested
do get back to us via Email: saresh_vinod@hotmail.com


Thanks
Sir Saresh Vinod.

RAJ said...

Respected sir,

First i would like to thank you for giving such good project report on ABSORBENT COTTON.

I would like to start such business in Saurastra (Gujarat)
please guide me for this business in details regarding

1)Machinery Required and Its manufacturers.
2)Market demands in India as well out of India.
and
3)Licences and Registration required for this production as wel for exports.
4) how much Expense,Establish and Invest For Start Of This Business
5) How Many Manufacturer In Saurastra Area
Please Send Mail me kunjesh9@yahoo.com
mob 09227878882

Unknown said...

hi ,Good information thanks.
Bleached Cotton Comber Suppliers From India

Anonymous said...

Dear Sir ,

I'm from Dharwar. I would like to start surgical cotton business in Karnataka.

I need your guidelines and consultation regarding this project.

Initially to get started, Please guide me for this business in details regarding :


1) How much minimum possible investment initially required ?
2) Project Report and Quotation ?
3) Machinery Required and Its Manufacturers ?


Please tell me from where can i get training for manufacturing process of cotton.

Thanking You.

Best Regards,
Shreesh.
shreesh_bhat2000@yahoo.com,
09448684912.

Unknown said...

Dear Sir ,

I'm from Dharwar. I would like to start surgical cotton business in Karnataka.
I need your guidelines and consultation regarding this project.
Initially to get started, Please guide me for this business in details regarding :


1) How much minimum possible investment initially required ?
2) Project Report and Quotation ?
3) Machinery Required and Its Manufacturers ?


Please tell me from where can i get training for manufacturing process of cotton.

Thanking You.

Best Regards,
Shreesh.
shreesh_bhat2000@yahoo.com,
09448684912.

Unknown said...

Good information,Thanks for sharing.
Bleached Cotton Manufacturers

dr praneet jambhule said...

thank you for your valuable information about cotton project...
i am Dr. Praneetkumar N Jambhule from nagpur maharashtra..
i would like to start this project in nagpur region.
sir plz guide me for this project.
1. all over investment for this project. like initial amount n looan amount.
2.detailed project report
3. machinery details and cost of them
4. how to get licence and registration
5. market of medical cotton.

dr praneetkumar jambhule

praneetjambhule@gmail.com
9766862229 / 9403102210

thank you sir

Unknown said...

Dear Sir,
Thanks for the project report. Sir, we would like to set up a unit at Gulbarga (Karnataka). Can you please give update us about the latest project cost and costing of product and its market. My email ID is bajajub@gmail.com. Shall be highly thankful for your reply. Regards
UTTAM

Unknown said...

Dear Sir,
Thanks for the project report. Sir, we would like to set up a unit at upsidc kosi kalan. Can you please give update us about the latest project cost and costing of product and its market. My email ID is agrawalt21@gmail.com. Shall be highly thankful for your reply. Regards
UTTAM

Unknown said...

Nice blog to be honest I love to read these kinds of blogs and would like to share this Absorbent Bleached Cotton Manufacturers

Unknown said...

Nice blog to be honest I love to read these kinds of blogs and would like to share this Absorbent Bleached Cotton Manufacturers

Unknown said...

very nice blog to be honest good information and would like to share you can refer this for mor in fo on Bleached Cotton Rolls Manufacturers

Mr. Savla said...

Hi Mr. Sathyam,

I really liked your report.

I too would like to get the same details as others posted above me. Here is a list of things that I would like to know:
1) Updates in the costs as per today (2014)
2) Machinery required and is it better to acquire it domestically or to import it?
3) Market demands in India as well abroad.
4) Licences and Registration required for this production as well for exports.
5) Are there any government grants/subsidies here?
6) Which is the best place to set up a plant according to your analysis?

Thanks a ton! :)

Anonymous said...

Dear Sir
I have read the report given by you its very good and i just wanted to know if the present cost of all the things can be known then please help me out you can send the mail on nandan_tec_mac@yahoo.co.in.
Mr Dishit Sinojia.

Anonymous said...

Dear Sir,
Firstly thankyou for giving such good project report on ABSORBENT COTTON.
I'm realy surching for such report. I go through u'r report and it is very helpful.

I would like to start such business
pls guide me for this business in details for .

1)Machinary Reqired and Its manufacturers.
2)Market demands in India as wel out of India.
and
3)Licences and Registration required for this production as wel for exports.
Rahul hatte
Rahul.pharma28@gmail.com and shlock.industries@gmail.com

Anonymous said...

Dear Sir,

Please provide me complete details for project on Absorbent cotton/ Surgical cotton plant.
Please provide me your contact details.

Sagar Agrawal
+91-9860296449

Sagar said...

Dear Sir,

Please provide me complete details for project on Absorbent cotton/ Surgical cotton plant.

Email id: sagaragrawal23@gmail.com

Please provide me your contact details.

Sagar Agrawal
+91-9860296449

Unknown said...

Dear Sir,

I'm also planning to work on this project. Kindly provide me all details of Absorbent cotton/ Surgical cotton plant.

Contact Details:
Arvind Dogra
EmailID: arvind.dogra007@gmail.com
MobNo: +91-9463695442

Anonymous said...

Hi sir how are you . My self Raja i am from Newzealand. i would like to start a absorbant cotton unit in small scale size in andhrapradesh.

I would like to ask you to provide some necessary details about that.

regarding
* market potential
*manufacturing standards
*plant cost
*machninery purchase


rajandraprasad@gmail.com

it would be great if you could help me with that

Thanks

Unknown said...

Dear Sir,

Please provide me complete details for project on Absorbent cotton/ Surgical cotton plant.
Please provide me your contact details.
and about licneing in maharastra

amit kedia
09422922936
amkedia2@gmail.com
maharastra

Cj-map said...

dear Sir, your report is very educative and i need to have a one on one contact with you. am interested in setting up a unit of it in my country. my id :- apimky@gmail.com or apimky@yahoo.com please reply.

Anonymous said...

thank you for the report sir

is this works out in Telangana state

botl.19@gmail.com

Anonymous said...

botla.19@gmail.com

Brijpal Singh Choudhary said...
This comment has been removed by a blog administrator.
Kalyan said...

Dear Sir,
Do you have any reports on the manufacturing of Gauze Rolls? Kindly send it to my id. kalkrish77@gmail.com

regards,
kalyan

Unknown said...

nice report, i want to know all the documentation needed to set up this industry.

Unknown said...

sir, this is very useful report but i want some more information about tha machine and type of raw ginned cotton, and who are the suppliers. please give me informatiion on my email id. director.mssurgicals@gmail.com

Unknown said...

Thanks for sharing this informative blog !!!Market Research consulting | Enterprise Mobile Security (EMS) Market Report

Hema said...
This comment has been removed by the author.
Hema said...

Hello Sir, Can you give detail information about below

1.Machinery Cost
2.Machinery Suppliers
3.Licence Required if Any
4.Manufacturing process in detail
5.Any documentation or links related to this

My mail id is hemak83@gmail.com

Thanks
Hema

Unknown said...

Hello sir , my self suredra
i am planing to start surgical cotton manufacturing pant in guntur aria AP. please send me details about how to get licence.
if anybody interested to join please contact
mail : surendrapharma0219@gmail.com
contact :9959174743



Unknown said...

Hi Sir, I'm Roshan from Bangalore.

Can you please provide more information about the

1.Machinery Cost
2.Machinery Suppliers
3.Licence Required if Any
4.Manufacturing process in detail
5.Any documentation or links related to this

My mail id is roshan19may@gmail.com

Regards,
Roshan

Unknown said...

Hi sir Good report on feasibility of surgical cotton
Can u provide the information regarding
Machinery suppliers
Licences to be taken
And any other documentation and other useful information if any
My mailid is bussa.sanjay38@gmail.com

Unknown said...

pls guide me for this business in details for :

1)Machinery Required & its costing and Its manufacturers.
2)Its process & Electric connection load .
3)Market demands in India as well out of India.
4)Licences and Registration required for this production as wel for exports.
I statr the unit as early as possible.
My email id is agrawalvivek316@gmail.com

Unknown said...

hi sir
i am surendra from guntur , andra pradesh , i am interested to
establish a manufacturing unit of surgical cotton. please give me the
information about market in my locality and plant cost . please send
me the any other business plans in the rang of 50 lacs.
mail id ; surendrapharma0219@gmail.com

sudam pawar said...

Dear sir,
pls guide me for this project with project report & pl. guide me for the following points:

1)Machinery Required, its costing and Its manufacturers.
2)Its process & Electric connection load .
3)Market demands in India as well as for export.
4)Licences and Registration required for this production as well as for exports.
5)Scope for this product ( current demand & supply ratio in India )
Pl. inform on : sudampawar001@gmail.com

Unknown said...

I really liked your report.

I too would like to get the same details as others posted above me. Here is a list of things that I would like to know:
1) Updates in the costs as per today (2016)
2) Machinery required and is it better to acquire it domestically or to import it?
3) Market demands in India as well abroad.
4) Licences and Registration required for this production as well for exports.
5) Are there any government grants/subsidies here?


Send me a information to my Mail hg_instyle@yahoo.com

Thanks a ton! :)
Send m

Manish said...

I really liked your report.

Is it viable in Bihar??

I too would like to get the same details as others posted above me. Here is a list of things that I would like to know:
1) Updates in the costs as per today (2016)
2) Machinery required and is it better to acquire it domestically or to import it?
3) Market demands in India as well abroad.
4) Licences and Registration required for this production as well for exports.
5) Are there any government grants/subsidies here?


Send me a information to my mail
rcfabtex@Gmail.com

Regards

IMRAN POPTE said...

Please provide details about machinaries and gov subsidies if any

Priyatamil said...

Excellent goods from you, man. I’ve understand your stuff previous to and you’re just too excellent. I actually like what you’ve acquired here, certainly like what you are stating and the way in which you say it. You make it enjoyable and you still take care of to keep it sensible. I can not wait to read far more from you. This is actually a tremendous site..
Study Abroad Consultants in Chennai | Study in USA Consultants in Chennai | Overseas Education Consultants in Chennai

Pharma Centre said...

Sir please mail to me on vikasv404@gmail.com me too interested in this..

Roofing Sheets Suppliers In Mumbai said...

Thank you for sharing this informative post.

Yajnarup said...




I'm happy to joining this blog, It is a very nice experience for me... Thank you for all your postings.


FRP Manufacturers in Chennai

Nikhil Deshmukh said...

I would like to know the government subsidies available and process to avail it so that it can be helpful to set up manufacturing unit

Mayank said...

I really liked your report. I would like to know more about the machinery and its manufacturers.

Also i would like to know its viability in eastern India.

Kindly mail me on mayank.josephite07@gmail.com as i am very much interested in the same.

ROHIT METTU said...

Ho,
Thank you so much for your project report.
It's very helpful.
I want to start a new business of surgical Cotton.
Plant capacity is 500 kg per day.
I want the detailed manufacturing process and machinery details with their specification for detailed understanding...
Dear sir/madam please provide me above details on my email id ramettu@gmail.com

Thanking you in anticipation.

Email : ramettu@gmail.com
Phone: 9503338347

Alex said...

Immensely helpful!! Thank you for this. I am in the midst of this very "search" and you certainly raised some things I hadn't considered.
Medical Device Market Report with Research and Trends Till 2025 - Report Banana